Tait t2020 User Manual

Also see for t2020: Service manual Operator's manual Application note

Contents

38 User Function Menu( / ) to move through the list of callqueue entries.5. Press the enter key ( ) to return a call. Theradio switches to the channel the call wasreceived on and sends the call. The entry is thenautomatically removed from the call queue.6. Press the zero key ( ) to delete an entry fromthe call queue without returning the call.Exiting Call Queue Entry ModeTo leave the call queue, press another mode key(function, call, status, channel or alphanumeric). Ifthe last entry in the call queue has been returned ordeleted, the radio automatically exits from callqueue and reverts to the user function menu.Call Queue FullWhenever the queue is full, the radio continues toreceive calls, but does not resume what it was doingprior to receiving the call. Calls are only receivedon the active channel. Subsequent calls that arereceived overwrite the information about the previ-ous call.Call Diversion This feature enables the radio to be put into calldiversion mode, where any valid incoming 5-tonesequence causes the radio to transmit another userdefined 5-tone or DTMF sequence on the pro-grammed call diversion channel. The sequence tobe transmitted and the call type (5-tone or DTMF)can be entered by the user while in call diversionsetup mode.