177E PTX_SETUP OptionOverviewThe PTX_SETUP commands are a superset of commands which allow theprinter to perform several tasks by parsing commands either stored in flash orsent to the printer by the host. Commands range from printer configurationoperations to file system operations.This appendix describes the PTX_SETUP commands.The PTX_SETUP CommandsPTX_SETUP commands are designed for easy printer operation performanceby allowing print operations to function without using the operator panel.Some concepts to keep in mind are as follows:1. PTX_SETUP commands are not emulation specific.2. The PTX_SETUP command set is case sensitive; all PTX_SETUPcommands are in upper case characters only.3. The white space separating commands may be any number of spacesand tabs. This allows a PTX_SETUP file to be formatted for easierreadability.4. Any unknown command will terminate the PTX_SETUP processing. Theoffending command will be printed on paper.5. PTX_SETUP command set allows for multiple parameters separated bycommas, semicolons, spaces or tabs.
