98Chapter 4 TCP/IP MenuETHERNET PARAMSThe ETHERNET PARAMS menu helps your printer communicate on anetwork.NetBIOS ProtocolThis option determines whether the NetBIOS protocol will be available. Theselections are as indicated below:• Enable (default). Makes the NetBIOS protocol available with the ethernetinstalled.• Disable. Makes the NetBIOS protocol unavailable during printeroperation.ASCII Data PortThis option sets the port number for ASCII print jobs. The data port numberneeds to match your host system setting.• 9100 (default)• 1023 - 65535Keep Alive TimerThis is the time that the Keep Alive Timer will run. With the Keep Alive Timeron, the tcp connection will stay connected even after the print job hasterminated.• 3 Minutes (default)• 2 - 10 MinutesETHERNETPARAMS(from page 96)* = Factory DefaultASCIIData PortEthernetSpeed9100*1023 - 65535Auto Select*10 Half Duplex10 Full Duplex100 Half Duplex100 Full DuplexKeep AliveTimer3 Minutes*2 - 10 MinutesNetBIOSProtocolEnable*DisableJob ControlStandard*EnhancedFast StandardOff
