Jun 06TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide 7-25Interface MenuInterface MenuThe Interface Menu provides access to the printer interface settings. Use the following proce-dure to enter the interface menu:1. Press the MENU button on the control panel.2. Press the NEXT button until the text “Interface Menu” is shown on the second line of thedisplay.3. Press the SELECT button to enter the interface menu.4. Press the NEXT button to move through the submenus: Port, Parallel Setup, Network 1Setup, Spooling, and USB Setup.Use the procedures in the following table to access and change the printer interface settings:SUBMENUS DEFAULTSETTINGAVAILABLESETTINGSPROCEDURE FOR CHANGING SETTINGPORTThis submenu allowsyou to enable the typeof interface.Parallel:OnNetwork Card 1:OnUSB:OnParallel:On, OffNetwork Card 1:On, OffUSB:On, Off1. Press NEXT or PREVIOUS to togglebetween PARALLEL, NETWORK CARD1 and USB.2. Press SELECT to save this setting.PARALLEL SETUPThis submenu allowsyou to set up theparallel interface.Interpreter:Auto SwitchFormat:RawMode:BidirectionalDelay Out Close:OffBinary PS:OffInterpreter:Auto SwitchPCLPostScript 3Format:RawNormalBinaryMode:BidirectionalStandardDelay Out Close:OffOnBinary PS:OffOn1. Press NEXT or PREVIOUS to scrollthrough the INTERPRETER, FORMAT,MODE, DELAY OUT CLOSE, andBINARY PS submenus.2. Press SELECT to choose a submenu.3. Press NEXT or PREVIOUS to scrollthrough the settings.4. Press SELECT to choose and save asetting.
