Jun 06TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide 1-25Adjusting Colour RegistrationAdjusting Colour RegistrationAfter printing out the alignment page, determine the correct values for colour alignment.Determining ValuesThere are two sets of colour registration bars, one vertical set and one horizontal set. Underthe horizontal bars are a number of vertical lines, Yellow, Magenta and Cyan. Find the valuesof the straightest lines. These are the vertical registration values.From the lines to the left of the vertical bars find the values of the straightest lines. These arethe horizontal values.Entering ValuesUsing the control panel, enter the values that you found in the Colour Registration AdjustmentChart to make the adjustments.1. From the Ready status, press MENU, the control panel display will read:MenuJob Library2. Press PREVIOUS or NEXT until the display reads:MenuColour Menu3. Press SELECT, the display will read:Colour MenuRendering Intent4. Press PREVIOUS or NEXT until the display reads:Colour MenuAlignment5. Press SELECT, the display will read:AlignmentAlignment Page6. Press PREVIOUS or NEXT until the display reads:AlignmentM-V Adjust (600)7. Press SELECT, the display will read:M-V Adjust08. Press PREVIOUS or NEXT until the correct adjustment value is shown on the display.9. Press SELECT to store this value.Repeat steps 6 to 9 to adjust the other settings, Y-V, C-V, M-H, Y-H and C-H.Print out another colour Adjustment page to confirm the alignments.
