Jun 06TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide 1-7Installation ProcedureInstallation ProcedureThis section describes how to install the printer.Removing the TapeWhen the printer is first taken out of the packaging box, the covers of the printer are taped.Remove the tapes.Installing the Optional AccessoriesIf you have purchased any optional accessories, install them before the drum cartridge, andbefore loading paper. If there are no optional accessories to install, proceed to the next section,“Installing the Drum Cartridge” (P. 1-7).550 Sheet Tray Module / 1100 Sheet Tray ModuleRefer to “550 Sheet Tray Module” (P. 6-2) and “1100 Sheet Tray Module” (P. 6-2) for details.Installing the Drum CartridgeWhen installing the drum cartridge, take note of the following points:WARNING• Never throw a drum cartridge into an open flame. Toner remaining in the cartridge can causean explosion and you can get burnt.• Do not subject it to direct sunlight or strong light.• When installing the drum cartridge, select a location not subject to strong light and try to finishthe installation within 1 minutes.• Do not touch the surface of the photosensitive drum. Do not stand or place the drum cartridgeupside down. The drum might get damaged.Refer to• Replacing the drum cartridge: “Replacing the Drum Cartridge” on page 5-91. Push up button 1 and fully open the front cover 2.
