Jun 06TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide 9Safety NotesFor Machine OperationDo not place any liquid container such as a vase or coffee cup on the machine. Split watercan cause fire or electric shock.Do not place any metal parts such as staples or clips on the machine. If metal and flammableparts get into the machine, they can short-circuit internal components, and cause fire orelectric shock.If debris (metal or liquid) gets into the machine, switch off and unplug the machine. Contactour Customer Support Center. Operating a debris-contaminated machine can cause fire orelectric shock.Never open or remove machine covers that are secured with screws unless specificallyinstructed in this manual. A high voltage component can cause electric shock.Do not try to alter the machine configuration, or modify any parts. An unauthorizedmodification can cause smoke or fire.This equipment is certified as a Class 1 laser product under IEC60825-1 (Class 1). Thismeans that the machine does not emit hazardous laser radiation. Since radiation emittedinside the machine is completely confined within the protective housings and externalcovers, the laser beam cannot escape from the machine during any phase of useroperation. Do not perform any operation apart from the instructions given in the manual.There may be a danger of laser beam leakage.Do not place a magnet near the safety switch of the machine. A magnet can activate themachine accidentally, resulting in injuries.Never touch a labeled area found on or near the heat roller. You can get burnt. If a sheet ofpaper is wrapped around the heat roller, do not try to remove it by yourself to avoid injuriesor burns. Switch off the machine immediately, and contact our Customer Support Center oryour dealers.Do not place any heavy object on the machine. An off-balance machine can fall over or theheavy object can fall, causing injuries.Do not use a highly flammable spray or solvent near the machine. It can cause fire.WARNINGCAUTION
