Jun 063-14 TallyGenicom Intelliprint 8026DN Color Laser Printer User GuideWarning Messages and Error MessagesError MessagesThe table below lists error messages, the possible causes of each error, and the actionsrequired to recover from each error.Error Message Possible Cause ActionLoad Paper Tray [x][type] [size]There is no paper or wrong paper intray [x]Add correct paper type tocorresponding trayTray [x] MissingInsert TrayTray [x] is out of printer Insert the corresponding tray intoprinterFront Cover OpenClose CoverThe front cover is open Close the front coverFeed JamCheck Tray [x]A paper jam has occurred in tray [x] Remove jammed paper fromcorresponding trayRegistration JamOpen Cover AA paper jam has occurred inside ofprinterOpen cover A and remover thejammed paperRegistration JamOpen Cover BA paper jam has occurred inside ofprinterOpen cover B and remove thejammed paperFuser JamOpen Cover BA paper jam has occurred inside theprinterOpen cover B and remove thejammed paperDuplex JamOpen Cover BA paper jam has occurred inside theprinterOpen cover B and remove thejammed paperFuser MissingInstall FuserThe fuser is missing from the printer Re-install the fuserBTR MissingInstall BTRThe BTR is missing from the printer Re-install the BTRPHD MissingInstall PHDThe process unit is missing from the Re-install the PHD (process) unitToner [x] MissingInstall Toner [x]Toner cartridge [x] is missing Re-install the corresponding tonercartridgeFuser Life OverReplace FuserThe fuser unit needs to be replaced Replace the fuser unitBTR Life OverReplace BTRThe BTR unit needs to be replaced Replace the BTR unitPHD Life OverReplace PHDThe process unit needs to bereplacedReplace the PHD (process) unit.Toner [x] EmptyReplace TonerToner cartridge [x]is empty Replace toner cartridge [x]Fuser Type ErrInstall / ResetWrong fuser unit installed Re-install or replace with correctfuserFuser Type ErrInstall / ResetWrong fuser unit installed Re-install or replace the fuser unit
