Jun 067-32 TallyGenicom Intelliprint 8026DN Color Laser Printer User GuideSystem MenuSystem MenuThe system menu provides access to system settings. Use the following procedure to enter thesystem menu:1. Press the MENU button on the control panel.2. Press the NEXT button until the text “System Menu” is shown on the second line of thedisplay.3. Press the SELECT button to enter the system menu.4. Press the NEXT button to move through the submenus: Factory Defaults, Display Lan-guage, Power Saver, Wait Timeout, Job Timeout, Jam Recovery, Hex Print, TonerLow, Page Compression, and Intellifilter.5. Press the SELECT button to enter a submenu.Use the procedures in the following table to access and change the system settings:SUBMENUS DEFAULTSETTINGAVAILABLESETTINGSPROCEDURE FOR CHANGINGSETTINGFACTORY DEFAULTSThis submenu allows you to resetthe printer to U.S. or Non-U.S.factory defaults.U.S. U.S.Non-U.S.1. Press NEXT or PREVIOUS totoggle between U.S. and NON-U.S.2. Press SELECT to choose and setthe factory defaults.DISPLAY LANGUAGEThis submenu allows you tochange the language of thedisplay messages.English EnglishFrancais (French)Deutsch (German)Italiano (Italian)Espanol (Spanish)…1. Press NEXT or PREVIOUS to scrollthrough the available languages.2. Press SELECT to choose and setthe language.POWER SAVERThis submenu allows you tochange the time (in minutes) whenthe printer enters the Power SaverMode.15 1 to 999 1. Press NEXT or PREVIOUS toselect the number of minutes.2. Press SELECT to choose and setthe time.WAIT TIMEOUTThis submenu allows you toincrease or decrease the length oftime (in seconds) that the printerwill remain in the waiting state—ajob is being processed, noend-of-file has been detected, andthere is no more data to process.This setting applies to both PCLand PostScript print jobs.00020 0 – 99999 1. Press NEXT or PREVIOUS toincrease or decrease each digit ofthe five-digit number.2. Press SELECT set one digit andmove to the next digit.3. Press SELECT after changing thelast digit to save this setting.
