Jun 068-12 TallyGenicom Intelliprint 8026DN Color Laser Printer User GuideUsing the Hard Disk/Compact Disk Option and User Flash DIMM ModuleDevice Parameter SetsWhen installed, a device parameter set will be supported for either or both FLASH SIMM andhard disk options. The parameter sets can be referenced using the device names %flash% or%disk0%. Each parameter set will include the following parameters:■ LogicalSize■ Writeable■ BlockSize■ Searchable■ SearchOrder■ Type■ Mounted■ HasNames■ PhysicalSize■ InitializeAction■ Free■ RemovableWarmstart.ps and Sys/Start FilesWhen either or both the FLASH SIMM or hard disk/compact flash options are installed, thereare two features which provide support for automatic execution of a PostScript program duringpower-on initialization.The first feature is the warmstart.ps file. Each time the printer is powered on, either or bothoptional storage devices will be checked for a file named warmstart.ps. If this file is found, it willbe read and parsed by the PostScript interpreter. It is up to the PostScript programmer to cre-ate the content of this file and get the file onto the storage device using the PostScript deviceand file operators.The second feature is the Sys/Start file. If either or both of the optional storage devices areinstalled, an additional parameter will be supported in the System Parameter set. This parame-ter is an integer parameter called StartupMode and is set to 1 by default.NOTE: This parameter can be read or written using the dosysstart and setdosysstartoperators.Each time the printer is powered on, if the StartupMode parameter is set to 1, either or both theoptional storage devices will be searched for a file called Sys/Start, a file named Start in a pathcalled Sys. If this file is found, it will be read and parsed by the PostScript interpreter. Again, it isup to the PostScript programmer to create the content of this file and get the file onto the stor-age device using the PostScript device and file operators.
