2–Quick Start GuidesTASCAM DP-004 21TIPUse the track 1 PAN knob to set the stereo position of•the track signal.If you are not satisfied with the recorded sound,•follow the procedures above again from thebeginning. If you are satisfied with this recordingcontinue to the next section.Adding another recording (1)—record guitarto track 2Now, you will record lead guitar on track 2 whilelistening to the rhythm guitar on track 1. This time,you will need to change the track 2 record source.1 Press the ASSIGN key to open the INPUT ASSIGNscreen.The input channels (INPUT A or INPUT B) that are therecording sources for each track are shown. In theinitial setting, INPUT A is assigned as the recordingsource for tracks 1 and 3, and INPUT B is assignedas the recording source for tracks 2 and 4.2 Press the F4 (¶) key to select TRACK 2 to change itscurrent input channel from the default of IN B.3 Turn the DATA wheel to set the input to IN A.
