76 TASCAM DP-0048–Miscellaneous FunctionsMetronomeThis unit has a built-in metronome function that canbe used when the recorder is operating. You can setit to function during both playback and recording oronly during recording.1 When the Home Screen is open, press the MENU keyto open the MENU screen.2 Turn the DATA wheel to select METRONOME and pressthe F4 (¥) key to open the METRONOME screen.3 Set the following items. Use the F3 (§) and F4 (¶)keys to select each item, and turn the DATA wheel tochange the value.MODESelect OFF (metronome OFF), REC&PLAY (functionsboth during recording and playback) or REC ONLY(functions only during recording).TEMPOSet speed from 20 to 250 beats per minute (BPM).BEATSet the frequency of the accent from 1 to 12 fordifferent time signatures.LEVELSet the metronome volume from 0 to 127.4 When finished making settings, press the HOMEkey to return to the Home Screen. The metronomeshould now function according to the MODE settingset in step 3. Set to REC&PLAY, it will function bothduring playback and recording. Set to REC ONLY, itwill function only during recording. Set to OFF, themetronome does not function. Note that even if themetronome is on during recording, the metronomesignal is not recorded, but can only be heard whenmonitoring.NOTEThe metronome volume is not affected by the•MASTER LEVEL knob. Use the LEVEL item on theMETRONOME screen to adjust it.