88 TASCAM DP-00410–Editing TracksNOTEIf you choose the same track for both the SOURCE TRKand the DESTINATION TRK and press the F2 (EXEC) key,the “Same Track” message appears and the operation iscancelled.CLEAN OUT (track erase)This completely erases the selected track. Thiserases the entire track, so the IN and OUT pointshave no effect.There is only one parameter.CLEAN OUT TRKSelect the track or tracks to erase. The choices are1 to 4 (single track), 1/2, 3/4 (track pairs) and 1–4 (alltracks).After setting the parameter, press the F2 (EXEC) keyto execute the edit. Press the F1 (BACK) key to returnto the TRACK EDIT menu screen without editing.SILENCE (part erase)This erases the selected track between the IN andOUT points. This has the same effect as recording asilent signal between the IN and OUT points. Thisoperation does not change the track length.