58 TASCAM DP-0046–Basic Recording1 Press ASSIGN to open the INPUT ASSIGN screen.As shown above, the input channel that is therecording source for each track (1–4) is shown.In the initial setting, INPUT A is assigned as therecording source for tracks 1 and 3, and INPUT B isassigned as the recording source for tracks 2 and 4.2 Use the F3 (§) and F4 (¶) keys to select a track tochange its current input channel.3 Turn the DATA wheel to set the input to IN A or IN B.4 When finished making settings, press the HOMEkey to return to the Home Screen.Making the first recordingBefore following recording procedures below,confirm that the source that you want to record isconnected, and that the input channel is assigned arecording source for a track. Monitoring headphonesshould also be connected.1 Press the REC key of the track to record on. TheREC indicator blinks red (that status is called“record standby”). A maximum of two tracks canbe recorded simultaneously. If you press a differentREC key when the REC indicators of two tracks arealready blinking, the track that was put into recordstandby first will become inactive and the RECindicator will turn off.
