6–Basic RecordingTASCAM DP-004 59For example, if you press the REC keys for track 1,track 2 and track 3 in that order, track 1, whichwas pressed first, will no longer be in recordstandby, but track 2 and track 3, which werepressed afterwards, will be in record standby.2 Set the recording level. Turn the (INPUT A or INPUTB) LEVEL knob to adjust the input level of the inputchannel. Watch the display meters and the OLindicator above and to the left of the LEVEL knobwhile setting the level suitably. At the same time,confirm that sound heard from the headphones isnot distorted.NOTEThe meter for the track that the input signal is assignedto moves simultaneously with the corresponding inputmeter (A or B).OL indicatorThe OL indicator lights if the input is too loud. Ifthe OL indicator stays lit even when you lower theLEVEL knob, lower the output level on the signalsource connected to the input.Overloadwarning bar3 Press the playback (Á) key while pressing andholding the record (–) key. Recording starts andthe record (–) key indicator lights red. The trackREC indicator changes from blinking to lit.4 Press the stop (ª) key to stop recording.5 To return to the starting point of the recording,press the key while pressing and holding thestop (ª) key. (This is the Last Recording Point(LRP) function.)To go to the beginning of the song (00:00:00:00),press the Ô key while pressing and holding thestop (ª) key. (This is the Return To Zero (RTZ)function)6 Press the playback (Á) key to play the recorded
