Tascam DR-44WL Owner's Manual

Also see for dr-44wl: Reference manual Owner's manual Reference manual

Tascam DR-44WL Owner's Manual Manual pdf 7 page image

TASCAM DR-44WL 7NOTE• When both batteries are installed and the ACadaptor is connected, power will be suppliedfrom the AC adaptor.• The AC adapter for the unit includes twotypes of outlet plugs. Attach the type of plugthat matches the power outlet that you areusing.Changing the outlet plug$ %215341 Move the latch on the AC adapter in thedirection of the arrow.2 Pull off the outlet plug.3 Replace it with the other outlet plug (A or B).4 Move the latch on the AC adapter in thedirection of the arrow again.5 Attach the outlet plug to the AC adapter.CAUTIONDo not use the adapter if there is anythingabnormal about the plug after changingit. Use when the plug is abnormal couldcause fire or electric shock. Contact the storewhere you purchased this unit or a TASCAMcustomer support service to request repair.Starting up the unitWhen the unit is turned off (standby state), slidethe HOLD/ switch in the direction and,when TASCAM DR-44WL (start-up screen) is displayed,release the switch.The Home Screen appears when the unit starts up.Selecting the languageYou can change the language shown on the display.The first time you turn the unit on after purchasingit, the LANGUAGE screen will open. You can set thelanguage used on this screen. You can also changethis setting with the SYSTEM screen LANGUAGE item.1. Turn the wheel to move the cursor and selectthe language.2. After making the selection, press the ENTER/MARK button to confirm it.If you accidentally select thewrong languageSlide the HOLD/ switch to turn the power off.Then, slide the HOLD/ switch while pressingand holding the MENU button to turn the unit onagain.The language selection menu where you can set thelanguage appears.Setting the built-in clockWhen the unit is started up for the first time (or afterbeing left without batteries), the DATE/TIME screenappears before the start-up screen to allow the dateand time to be set.Use the .// button and the wheel to enterthe date and time, and press the ENTER/MARKbutton to set them.Shutting downWhile the unit is turned on, slide the HOLD/switch of the left side panel in the directionand, when TASCAM DR-44WL shutting downappears, release the switch.The power turns off in a few seconds.Connecting monitoring devicesand headphonesTo listen with headphones, connect them to the /LINE OUT jack.To listen with an external monitoring system(powered monitor speakers or an amplifier andspeakers), connect it to the /LINE OUT jack.Headphones Powered monitor speakersoran amplifier and speakersBasic menu operationprocedures1. Press the MENU button to open the MENUscreen.2. Use the wheel to select (highlight) one of themenu items, and then press the ENTER/MARKbutton to go to the desired setting screen.3. Use the wheel to select (highlight) an item toset.4. Press the ENTER/MARK button or / buttonto move the cursor to the right and highlightthe setting value.5. Use the wheel to change the setting.6. When setting a different item in the samemenu, press the ENTER/MARK button or .to move the cursor to the left.7. Repeat Steps 3. to 6. as necessary to set otheritems.8. When finished, press the 8/HOME button toreturn to the Home Screen.Menu structureMENUMODE Select recording orplayback modeREC SETTING Set for recordingAUTO FUNCTION Convenientfunctions forrecorded filesBROWSE(only when the 4CH modeis selected)SONG(only when the MTR modeis selected)Operate files andfolders in the SDcardTOOLS Set other convenientfunctionsREVERB Set reverb effectsPOWER/DISPLAYSet the powersupply and thedisplaySYSTEM System settings ofthe unit