Tascam HS-4000 Owner's Manual

Also see for HS-4000: Owner's manual New features Release notes

Contents

112 TASCAM HS-400011 – Internal settingsLevel meters settings (METER SETUP)Make level meter settings.Metering PointSet whether the meters show the signal before or after theonline faders.Meters show the levels before the faders(default).Meters show the levels after the faders. In thiscase, the button appears light blue.Ref. Level LineTouch to turn the reference level line that appears on thelevel meter ON (default) or OFF.Reference level line display ONOver LevelUse this to set the level at which the overload indicatorlights.The peak indication level is this amount below themaximum level (full scale).Touch this knob and use the DATA dial to adjust the level.Setting options: −0.20 dB (default), −0.17 dB, −0.13 dB, −0.10dB, −0.06 dB, −0.03 dBThis setting is reflected in the Audio Over setting of the AutoMarker item on the OPTIONS page of the REC SETUP screen.Peak Hold TimeUse this to set the peak hold time.Touch this knob and use the DATA dial to adjust the time.Setting options: 0 sec, 1 sec, 2 sec (default), inf (infinite hold)Release TimeUse this to set the release time.Touch this knob and use the DATA dial to adjust the time.Setting options: Slow, Normal (default), FastNOTEIf you press the EXIT/CANCEL (PEAK CLEAR) key when theHome Screen is open, the peak hold display resets.System settings (SYSTEM SETUP)Make system settings on this screen.The SYSTEM SETUP screen has 5 pages: PREFERENCES,REFERENCE LEVEL, ANA Ref LVL ADJ, Backup/Startup and CLOCKADJUST.Touch the tabs at the bottom of the screen to open the corre-sponding page.PREFERENCES pageSet system preferences on this page.KBD TypeSet the connected keyboard type to either US for English-language keyboards or JPN for Japanese keyboards.Setting buttons: US, JPN (default)ONLINE FunctionSet whether or not to enable the online function (default:Switchable).Set to “Switchable” to allow online playback mode to beenabled from from the ONLINE key on the front panel, theparallel connector, serial connector (RS-232C) or a TASCAMRC-HS32PD remote controller (sold separately).Set to AlwaysON to not allow online playback to be usedand always output the sound from all connectors. (See“Using the numeric entry screen to edit the playbackbeginning and ending positions” on page 90.)Auto Take SortWhen this setting is ON, the playback order of takes in thecurrent session will automatically be reordered by takename in character code order at the times indicated below.Setting buttonsOFF: Auto Take Sort function disabled (default)ON: Auto Take Sort function enabled0 Auto Take Sort execution timingo When the unit is started with media in the current sloto When media is inserted in the current sloto When the current slot is changedo When a project is loadedo When a session is loadedNOTEEven if Auto Take Sort is set to ON, automatic take sortingwill not occur in the following circumstances. If you wantto reorder the playback order of takes by their names incharacter code order after the following operations, use theSORT button in the pull-up menu on the take list screen.• After stopping recording• After adding a file to the current session by FTP• After adding a file to the current session using the copyfunction