Tascam HS-4000 Owner's Manual

Also see for HS-4000: Owner's manual New features Release notes

Contents

TASCAM HS-4000 212 − Names and functions of partsWhen recording in take mode, a red progress bar repeatedlyextends from the left end to the right end in a cycle of about5 seconds.; Take/entry name (button)This shows the name and mode icon of the currently activetake or entry.When in recording standby, this shows the file name thatwill be given to the next recorded take.The two types of file mode icons are as follows.Monophonic modePolyphonic modeWhen in playlist mode, a “*” appears in the icon if the playlisthas not been saved after editing (including the addition andremoval of entries).Touch this area to open a pull-down menu.8 In take modeTAKE List buttonThis opens the take selection screen (TAKE screen). At thistime, even if you press the session name display area, theSESSION selection screen will not open.(See “PROJECTscreen” on page 37.)CIRCLE @ TAKE buttonTouch this to add or remove “@” at the beginning of thecurrent take name.(See “Using @ with take names” on page73.)REBUILD buttonUse to rebuild when, for example, a file has been erasedfrom the unit using FTP.8 In single playlist modeASSIGN FILE buttonThis shows the ASSIGN screen where you can assign files.(See “Assign File screen” on page 83.)ENTRY LIST buttonThis shows the entry list (ENTRY) screen. (See “Entry listscreen” on page 81.)ADJUST ENTRY buttonThis opens the ADJUST ENTRY *** screen where you canedit an entry. (See “Editing entry titles” on page 88.), (See“Editing the playback start and stop positions” on page89.), (See “Using the numeric entry screen to edit theplayback beginning and ending positions” on page 90.)REBUILD buttonUse to rebuild when, for example, a file has been erasedfrom the unit using FTP.SAVE buttonThis saves the current playlist. This can only be selectedwhen stopped. (See “Saving a playlist” on page 93.)SAVE AS buttonThis adds a name to the current playlist and saves it. This canonly be selected when stopped. (See “Saving a playlist” onpage 93.)EXPORT PPL buttonThis creates a JPPA PPL file from the current playlist. This canonly be selected when stopped. (See “Creating a JPPA PPLfile from the loaded playlist” on page 94.)z Level metersThese are the same as on the Home Screen in timelinemode.As on the Home Screen in timeline mode, you can touch thisarea to use the solo function.x Time display areaWhat is shown depends on the time display mode.Time displaymode Left end Right end00:00:00:00 Total take or entrylengthTotal take or entrylength 00:00:00:0000:00:00:00 Total session orplaylist lengthTotal time of sessionor playlist 00:00:00:00Starting time ofsession or playlistEnding time ofsession or playlistDuring recording and recording standby, however, timesand dividing lines are not shown.c Flash Page number and knobThis shows the Flash Page number. Touch this area to enableselection (yellow background), and turn the DATA dial to