Tascam HS-4000 Owner's Manual

Also see for HS-4000: Owner's manual New features Release notes

Contents

48 TASCAM HS-40006 – Overview of operation modesPlaylist mode functionsThe following functions can be used in playlist mode.i Playlists can be edited and managed.i Compatibility with JPPA flash start standards enableimporting and exporting, and the exchange of playlists withother devices.In addition, the single, dual and A/B MIXED playlists modes havethe following functions.Single modei Unit functions as a single playback system.i Auto cue, auto ready and incremental play functions areavailable.i Playback of polyphonic files with up to four channels ispossible at all compatible sampling frequencies (Fs).i Using a TASCAM RC-HS32PD or other remote controller, flashstart playback is possible (three pages of 32 keys each).Dual modei Unit functions as two independent playback systems (usingseparate playlists for each).i Auto cue, auto ready and incremental play functions areavailable.i Simultaneous playback of two polyphonic files with up totwo channels each is possible at all compatible samplingfrequencies (Fs).i Using a TASCAM RC-HS32PD or other remote controller, flashstart playback is possible (each player can have 6 pages of 16keys each or 8 pages of 12 keys each and independent pageswitching).NOTE• Only playlists in the current session can be loaded. Playlistsfrom sessions other than the current session cannot beloaded.• The same playlist cannot be loaded in both player A andplayer B at the same time.A/B MIXED modeIn dual mode, the key assignments are fixed. Those on the leftare assigned to A and those on the right are assigned to B. InA/B MIXED mode, though, key assignments can be switchedbetween A and B as desired.0 Unit functions as two independent playback systems.0 Simultaneous playback of 2 polyphonic files with up to2 channels each is possible at all compatible samplingfrequencies (Fs).0 Using a TASCAM RC-HS32PD remote control, dual flash startplayback is possible (32 keys × 3 pages).0 Two output destinations can be set independently for eachentry.0 The function when a flash key is pressed during playback canbe set independently for each entry.0 Five colors are used for the indications on the displays ofthis unit and the RC-HS32PD and the flash keys, allowing forquick visual recognition of output destinations and statuses.A/B MIXED mode restrictionso The settings of the Auto cue, Auto Ready and Inc. Play itemson the CONTROL page of the PLAY SETUP screen are all fixedto OFF.o The setting of the Play Mode item on the GENERAL page ofthe PLAY SETUP screen is fixed to One Take.o The Flash Start Key Method item on the General page of theREMOTE SETUP screen is fixed to Individual. In modes otherthan A/B MIXED playlist mode, "Individual" is disabled andcannot be selected.o Only five of the time display modes can be used: ELAPSED,REMAIN, ELAPSED/REMAIN, REMAIN/ELAPSED and T/C. TheTOTAL and T.REM modes cannot be used.o When an existing playlist is loaded, if the same entry isassigned to both outputs A and B, the setting of the playlistloaded more recently is used.o When a PPL file is imported, if the same entry is assigned toboth outputs A and B, the output destination of this entrywill be set to A.