58 TASCAM HS-40007 – Timeline modeSelecting a region to copy, cut or delete• If editing start and end points have been set, the regionbetween these points is selected.• If editing start and end points have not been set, the entireregion where the time cursor is located in the current trackis selected.Editing start and end points not set• If the timeline cursor is located at the border betweenregions, the region to its right will be subject to the editing.If that region is silent, however, it will remain unselected.Setting editing start points1. Press the HOME key on the front panel to open the HomeScreen.2. Touch the EDIT MODE button to enter editing mode.3. Use them/, keys, for example, to locate the timelinecursor to the position (time) where you want to start editing.4. Touch the IN/OUT button to open a pull-up menu.5. Touch the SET IN button in the pull-up menu to set theediting start point (IN point).The IN mark ( ) appears at the current position in the markdisplay area.Setting editing end points1. Use them/, keys, for example, to locate the timelinecursor to the position (time) where you want to end editing.2. Touch the IN/OUT button to open a pull-up menu.3. Touch the SET OUT button in the pull-up menu item to setthe editing end point (OUT point).The OUT mark ( ) appears at the current position in themark display area.The interval between the IN ( ) and OUT ( ) marks, which isshown in blue, will be subject to editing.Clearing editing start and end points1. Touch the IN/OUT button to open a pull-up menu.2. Touch the CLEAR button on the pull-up menu to discard thecurrently set IN and OUT points.When a confirmation message pop-up appears, touch theOK button or press the DATA dial. The IN ( ) and OUT ( )marks in the mark display area will disappear.
