MEDIASTUDIO PRO USER GUIDE184Customizing a transitionThere are a number of options available in the Transition Options dialogbox that let you customize your transition. The variety of these availableoptions depends on the type of transition you are applying. The following isjust one example among hundreds.To customize a transition effect:1. Insert a Box-Wipe transition effect between twoclips.Note:Clicking the green arrow switch changes the direction ofthe transition effect from Va-->Vb to Vb--->Va.2. In the Transition Options dialog box, adjust theDivide by X value to 2. This divides the screenvertically to produce two box-wipe effects on thescreen at the same time.Note:Double-click a previously inserted transition to open the Transition Optionsdialog box. It is automatically opened when you insert a new transition only when theDisplay Options dialog box option is selected in File: Preferences: General tab.3. Enter a Border value of 1. Change the color of the border by clicking onthe Color square and selecting a color.4. Select one of the two Direction buttons to set the movement of thetransition.5. Enter an X value of 60 and a Y value of 50. This is the starting positionof the transition effect.Note:You can also set the starting position by dragging the control point that appearsin the center of the sample image. This option may not be available for all effects.6. Click OK to close the dialog box and apply the attributes to the transitioneffect. Preview the new transition.Box-Wipe Transition
