Vega Vegamet 381 Operating Instructions Manual
Also see for Vegamet 381: Operating instructions
                                                                    | |
SupplyWide-range power supply unit with 20 … 250 V AC/DC for world-wide use.You can find detailed information on the powersupply in chapter "Technical data" in the "Supple-ment".3.3 OperationThe adjustment of VEGAMET 381 is carried out viathe integrated keys and a 16-step function switch.3.4 Storage and transportPackagingYour instrument was protected by packagingduring transport. Its capacity to handle normalloads during transport is assured by a testaccording to DIN EN 24180.The packaging of standard instruments consists ofenvironment-friendly, recyclable cardboard. Forspecial versions, PE foam or PE foil is also used.Dispose of the packaging material via specialisedrecycling companies.Storage and transport temperaturel Storage and transport temperature see "Sup-plement - Technical data - Ambient conditions"l Relative humidity 20 … 85 %4 Mount4.1 General instructionsInstallation locationYou can plug the VEGAMET 381 signal condition-ing instrument on carrier rail 35x7.5 according toDIN EN 50022 or mount it directly to the wall bymeans of three screws or lowered into a front panelor switching cabinet door.4.2 Mounting instructionsCarrier rail mounting1 Place the adapter plate [1] to the rear ofVEGAMET 381 (spring of the adapter platedownward) and fasten the plate with screw [2](M4x6).2 PlaceVEGAMET 381 against the carrier rail [3]from below and push the instrument upwarduntil it snaps in.6143,521 3Fig. 10: Carrier rail mounting1 Adapter plate2 Screw (M4x6)3 Carrier railWall mounting1 Insert the metal strap [1] from above into thehousing cut-out.2 Fasten the instrument directly to the wall withthe three screws (ø max. 4 mm).10580ø 4,5*1Fig. 11: Wall mounting1 Metal strapFront panel mounting1 Remove the pluggable terminal strips from thetop and bottom.2 Screw pin [3] into the rear of VEGAMET 381and tighten with a screwdriver.3 Insert VEGAMET 381 from the front into thefront panel [1].4 Place the clamping strap [2] from the back overthe pin [3] and pull it with the knurled nut [4]against the panel [1].20 VEGAMET 381Mount27567-01-070216 |
Related manuals for Vega Vegamet 381
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine