22OPERATING MANUALVERSION 05/2017 ORDER NUMBER DOC 2354920 SPRINT XE5.2.3 TECHNICAL DATADimensions:Height 1,120 mm; 44.10 inchWidth 595 mm; 23.43 inchDepth 740 mm; 29.13 inchWeight approx. 40 kg; 88.18 lbsMaximum box size 420x420x400 mm; 16.54x16.54x15.75 inchesMaximum filling weight of box 30 kg; 66.14 lbsElectrical:Mains (AC) input terminal 90 VAC–250 VACFrequency 47 Hz–63 HzInput power maximum 110 WMains (AC) output terminal Vibrator motor maximum 70 WOutput voltage spray gun maximum 22 VppOutput current spray gun Max. 0.9 ACorona current limitation 5 μA–120 μA (adjustable)Tribo current cut off greater than 12 μA(ATEX: switching off of the unit)Pneumatic:Compressed air connection G1/4"Connection hose diameter 18.5x12.5 mmPressure range input air 0.6–0.8 MPa ; 6–8 bar; 87–116 psiAir flow maximum 15 m³/h; 529.63 cf/hSum of feed and dosing air 2–12 m³/h; 70.6–423.7 cf/hGun air 0.05–4.5 m³/h; 1.765–158.9 cf/hWAGNER injector type PI-F1, HiCoat ED pump F, PI-F1-SCompressed air quality according toISO 8573.16.5.2 according to ISO 8573.1, 2010WARNINGExhaust air containing oil!Risk of poisoning if inhaled.Insufficient paint application qualityProvide compressed air free from oil and water(Quality Standard 6.5.2 according to ISO 8573.1, 2010)6.5.2 = particle density ≤ 5 mg/m3; pressure dew point ≤ +7 °C;oil content ≤ 0.1 mg/m3Ambient conditions:If low-melting powders are used, the ambient temperature may have to be lower than 30 °C;86 °F.Volume measures for volumes specified in Nm³ (standard cubic meters). One cubic meterof a gas at 0 °C and 1.013 bar is called norm cubic meter.
