39OPERATING MANUALVERSION 05/2017 ORDER NUMBER DOC 2354920 SPRINT XE7.2.1 SWITCHING ON THE MANUAL SYSTEM0IEPG SPRINT X2x2x0 % 100 %kV80604020100Tri Cor5432112080402010 102030405060708090Ø12101198m /h2.03.00.50.30.11.535.54.53.52.5TriμAP_02646321ATo turn the power supply of the manual powder system on, set the mains switch on theback side (A) of the control unit to position "I".– After a few seconds the control unit is operational.– The system switches to recipe 1 "Surface parts" after every restart.– To switch the manual system off or on, actuate the "Standby" push button (2).Note:– The fluid air must be adjusted using the throttle (3), when first commissioning themanual system.– The control unit automatically recognizes the type of gun connected.– There are 50 recipes available for the spray gun.– When a Tribo gun is connected, the Tribo current scale is activated, while the high-voltage supply and control unit are deactivated.– All airs are only switched on once the manual gun's trigger has been actuated.
