8OPERATING MANUALVERSION 05/2017 ORDER NUMBER DOC 2354920 SPRINT XE2 CORRECT USE2.1 DEVICE TYPEManual powder system for manual coating of grounded work pieces.2.2 TYPE OF USEThe Sprint XE manual system is designed for single and serial coatings for industry andtrade.WAGNER explicitly prohibits any other use!Electrostatic manual coating systems may only be used in spray areas equipped in accordancewith EN 12981 or under equivalent ventilation conditions.The components of the three different versions of the Sprint XE manual system (Airfluid version,60 L tank version) are mutually compatible.The device may only be operated under the following conditions:Use the device only to work with the products recommended by WAGNER.Only operate the device as a whole.Do not deactivate safety fixtures.Use only WAGNER original spare parts and accessories.The operating personnel must be trained on the basis of this operating manual.Follow the instructions in the operating manual.2.3 FOR USE IN POTENTIALLY EXPLOSIVE AREASThe device is suitable for use in potentially explosive areas as defined in Directive 2014/34/EU(ATEX), (see Explosion protection marking Chapter 3.1).In explosion hazard areas, only use approved explosion-proofelectrical devices.2.4 PROCESSIBLE WORKING MATERIALS– types of powder that can be charged electrostatically;– metallic powder.Note:Contact your local WAGNER dealer and the lacquer manufacturer if you encounterapplication problems.2.5 MISUSEMisuse can lead to physical injury and/or property damage!Special attention must be paid that:Do not process liquid coating products, e.g. solvents or water-based lacquers;Do not process food, medicine or cosmetics.
