WAGO SPEEDWAY 767 Series Manual

Also see for SPEEDWAY 767 Series: Manual Manual Manual Manual Manual

WAGO-SPEEDWAY 767 Parameterizing 65767-5203 Serial Interface (RS-232, RS-422/-485)ManualVersion 1.1.07.4.2 Output Buffer, Serial InterfaceTable 37: Output buffer, serial interfaceParameter DescriptionDisplay mode In this box, select the display type for the data. You have the followingoptions:- ASCII*- HexadecimalData In this box, the data last sent by the control unit to be output by theinterface appears. The display is limited to max. 119 characters.Input in ASCII This box appears if you have selected manual operation for the serialinterface on the Settings page and the display mode is set to ASCII. Youcan enter up to 119 characters in this box, which are then transferred toan attached device independent of the control unit.If you enter more than the allowed number of characters, a redexclamation mark appears next to the input box.Input in hexadecimal This box appears if you have selected manual operation for the serialinterface on the Settings page and the display mode is set tohexadecimal. You can enter up to 119 characters in this box, which arethen transferred to an attached device independent of the control unit.If you enter more than the allowed number of characters, a redexclamation mark appears next to the input box.In this mode, the individual characters must be separated by asemicolon. Numbers not preceded by "0x" are interpreted as decimalcharacters and automatically converted to hexadecimal display.Pos : 31.17 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1