WAGO-I/O-SYSTEM 750 Appendix 125750-657 IO-Link MasterManualVersion 1.0.2, valid from FW/HW-Version 02/01Pos: 99 /Serie 750 (WAGO-I/O-SYSTEM)/Feldbuskommunikation/IO-Link/Feldbusspezifische Ergänzungen 750-0657 @ 10\mod_1302522154384_21.doc @ 71731 @ 23445664554343 @ 111.4 Fieldbus-Specific AdditionsIO-Link is a fieldbus-independent system that you can integrate in any fieldbussystem. You need the IO-Link master, the manufacturer and device-specificdevice description file IODD of the IO-Link device to be attached, the WAGO-I/O-CHECK 3 configuration software and if necessary, other device descriptionfiles, e.g. GSD/GSE files for integration in a PROFIBUS environment.The IODD file is provided by the manufacturer of the IO-Link device.13750-6571234567814910111213141516IO Link master-GSD/GSE filesConfigurator toolWAGO-I/O-CHECKManufacturerspecific devicedescriptionXML-IO-Link devices canonly use a limitednumber of parametersSensor,e. g. opticaldistance sensorIODD InterpreterIODD(IO Link devicedescription XML)-System/modulemanufacturer(PI domain)Sensor/aktuatormanufacturer(IO Link domain)-IO Link-PROFIBUSIO Link-Figure 42: Fieldbus integrationThe following sections point out features relating to the use of the IO-Link masterwith various fieldbuses.
