WAGO-I/O-SYSTEM 750 Configuration and Parameterization 43750-657 IO-Link MasterManualVersion 1.0.2, valid from FW/HW-Version 02/01Pos: 76 /Serie 750 (WAGO-I/O-SYSTEM)/In Betrieb nehmen/Konfigurieren und Parametrieren 750-657 @ 10\mod_1308311367741_21.doc @ 73700 @ 1 @ 19 Configuration and ParameterizationYou can commission, configure or parameterize in a variety of ways:• Software WAGO-I/O-CHECK using IODD device description files• Software WAGO-I/O-PRO with corresponding function block"WagoLib_IO_Link.lib" of the WAGO-I/O-PRO library• Configuration software using device description files (e.g. PROFIBUS-GSD/GSE), see appendix, section "Configuration Using PROFIBUSGSD/GSE"Configuration and parameterization via WAGO-I/O-CHECK and WAGO-I/O-PRO make use of acyclic communication via the Mailbox and registercommunication. For access via the Mailbox, a parameter access service isprovided by the I/O module. Register communication and the parameter accessservice are explained in the appendix, section "Register Communication" or"Mailbox 2.0 Transmission Method".Pos: 77 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
