66 Configuration and Parameterization WAGO-I/O-SYSTEM 750750-657 IO-Link MasterManualVersion 1.0.2, valid from FW/HW-Version 02/01Pos: 80 /Alle Serien (Allgemeine Module)/Überschriften für alle Serien/Inbetriebnehmen - Konfigurieren - Parametrieren/In Betrieb nehmen mit WAGO-I/O-PRO - Überschrift 2 @ 10\mod_1312356511415_21.doc @ 75646 @ 2 @ 19.2 Startup with WAGO-I/O-PROPos: 81 /Serie 750 (WAGO-I/O-SYSTEM)/In Betrieb nehmen/In WAGO-I/O-PRO programmieren/In Betrieb nehmen mit WAGO-I/O-PRO 750-0657 @ 10\mod_1312356244067_21.doc @ 75643 @ @ 1The WAGO-I/O-PRO library "WagoLib_IO_Link.lib" provides the option to startup the IO-Link master using the corresponding function blocks. In addition toconfiguring the IO-Link master, communication is also possible via parameteraccess service "IOL_CALL" (see appendix, section "Mailbox 2.0 TransmissionMethod") with attached IO-Link devices, with which the IO-Link devices can beconfigured and parameterized.IO-Link-specific diagnostic messages can also be displayed. If process data of anIO-Link device is fragmented, the data can be defragmented using functionblocks.Library cannot be used to set the process image size!The WAGO-I/O-PRO library "WagoLib_IO_Link.lib" is not used to set theprocess image size.Additional InformationThe WAGO-I/O-PRO library "WagoLib_IO_Link.lib" and a detailed descriptionare available on the Internet at http://www.wago.de Service Downloads AUTOMATION Libraries.Pos: 82 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
