Wacker Neuson ET18 Operator's Manual

Also see for ET18: Operator's manual

Contents

Wacker Neuson ET18 Operator's Manual Manual pdf 134 page image

5-40 OM ET18/20/24 us 1.3 * et18_20_24b510.fm55.10 AttachmentsPicking upWARNINGInjury hazard! Fluid escaping under high pressure candamage the skin and eyes!Can result in severe injury or death.► Do not allow anyone to stay in the danger zone.► Before connecting or removing hydraulic lines from theattachment, ensure that the work hydraulics is not underpressure.► Release the pressure in the work hydraulics.WARNINGInjury hazard when hitching attachments!Can result in severe injury or death.► Always wear protective equipment when installing theconnecting pins of the attachment.► Ensure that no one is in the danger zone.► Only use attachments that are in perfect condition.► After hitching the attachment or before starting machineoperation, ensure that the lock is correctly connected with themount.► Align the fastening bores in the bucket with a mandrel. Thismakes it easier to slide the pin into the bore connecting theattachment with the stick.► Do not correct an incorrect alignment with the connecting pinand a hammer. Fragments can chip off the pin if it is struckwith a hammer.► Remove the connecting pins from the bucket only if it is in astabile position and if it cannot be moved when removing theconnecting pins. Do not stand on the closed rear side of thebucket as you remove it. Do not place your foot underneaththe bucket.► Remove the bucket only if it is firmly positioned on the ground oron a solid base. Do not remove the connecting pins if the bucketis raised. The bucket can cause serious injuries if it falls.► Do not align the connecting bores with your fingers. In orderto avoid possible injury, keep your fingers and hands awayfrom the connections as you align the connecting bores.