9-14 OM ET18/20/24 us 1.3 * et18_20_24t900.fm99.14 Payload/stabilitySafety instructions – lift capacity tableThe values of the lift capacity table apply to normal operation (for exampleexcavating, etc.) (The values of the stability table apply to lifting gearapplications).DANGERCrushing hazard due to tipping over of the machine.Causes severe crushing or injury resulting in death.► The authorized lift capacity specified in the table must neverbe exceeded (the smallest value applies).► Get informed on the lift capacity of the attachment beforeusing it.► If a bucket or attachment (hammer, etc.) is installed, the deadweight and the contents of the bucket must be subtractedfrom the lift capacity specified in the table. Load density mustalso be taken into account.NoticeIf the specified lift capacity is exceeded, possible damage toproperty due to tipping over of the machine.► The authorized lift capacity specified in the table must neverbe exceeded (the smallest value applies).InformationThe indications are only approximate values. Attachments,uneven ground and soft or bad ground conditions affect liftcapacity. The operator must take these influences into account.
