7-32 OM ET18/20/24 us 1.3 * et18_20_24w700.fm77.8 Engine lubrication systemInformation regarding the engine lubrication systemInformationCheck the oil level once a day. We recommend checking itbefore starting the engine. After stopping a warm engine, wait atleast 5 minutes before checking.NoticeIn order to avoid engine damage, use the oil quantity and gradespecified in the fluids and lubricants table.► The oil level must be between the MAX and MIN marks.► Use only the specified engine oil (refill with the same engine oil).► Have the oil changed only by a Wacker Neuson servicecenter.NoticeIn order to avoid engine damage, add the engine oil slowly so itcan go down without entering the intake system.Checking the engine oil level1. Stop and park the machine. Stop the engine. See “Preparinglubrication”.2. Open the engine cover.3. Clean the area around the oil dipstick with a lint-free cloth.4. Pull out oil dipstick A.5. Wipe it with a lint-free cloth.6. Push it back in as far as possible.7. Withdraw it and read off the oil level.➥ The oil level must be between the MAX and MIN marks.➥ Add engine oil if necessary.8. Close and lock the engine cover.Fig. 248: Checking the oil levelAMAXMINA
