OM ET18/20/24 us 1.3 * et18_20_24i400.fm 4-144 Putting into operation4.1 Cab/control standSafety instructions regarding entry and exitCAUTIONAccident hazard when entering or exiting!Entering or exiting incorrectly can cause injuries.► Keep the mandatory climbing aids clean.► Use the mandatory climbing aids A for entering and exiting.► Face the machine as you enter and leave it.► Have damaged climbing aids replaced.Entry and exit (canopy)Stop the machine (see chapter “Operation, stopping the machine”).If the machine is equipped with a canopy, it can be accessed from eitherside.InformationEntry and exit via the tracks is only possible if the travel gear istelescopically extended (telescopic travel gear only for ET18 andET20).Cab entry and exitStop the machine (see chapter “Operation, stopping the machine”).InformationWhen entering or leaving the cab on the left-hand side, the doormust be locked in the arrester.InformationEntry and exit via the tracks is only possible if the travel gear istelescopically extended (telescopic travel gear only for ET18 andET20).Fig. 50: Entry and exit (canopy)AAFig. 51: Entry and exit on left-hand side of cabAPutting into operation
