OM ET18/20/24 us 1.3 * et18_20_24t600.fm 6-366.2 Loading the machineInformation regarding loadingWARNINGAccident hazard due to incorrect loading!Incorrect loading can result in accidents and severe injury ordeath.► Ensure that no one is in the danger zone.► Read the transport weight off the type label. Add the weight ofsubsequently installed equipment to the weight of themachine.NoticeEngine damage due to incorrect engine oil level.► The oil level must be visible at the MAX mark.Traveling onto transport vehiclesPreparatory work1. Secure the transport vehicle with chocks to prevent it from rolling.2. Position the ramps at the smallest possible angle. Ensure that thegrade does not exceed 15° (27 %).3. Use access ramps with an antiskid surface only.4. Ensure that the loading area is clear and access to it is not obstructed– due to superstructures, for example.Traveling onto transport vehicles1. Remove the shatter protection if the machine is transported on anopen platform.2. Start the engine of the machine.3. Raise the attachment and the stabilizer blade to avoid touching theramps.4. Carefully travel the machine onto the middle of the transport vehicle.5. Move the machine to transport position.6. Stop the engine.7. Raise the control lever base.8. Remove the starting key and carry it with you.9. Leave the cab, close and lock all doors, windows and covers.10.Secure and tie down the machine.Fig. 215: Access ramps< 15°Fig. 216: Transport position
