7-10 OM ET18/20/24 us 1.3 * et18_20_24w700.fm77.3 Fluids and lubricantsFluids and lubricantsUnit Engine/machine fluid Specification Season/temper-ature Capacities 11. The capacities indicated are approximate values; the oil level check alone is relevant for the correct oil level.Capacities indicated are no system fillsDiesel engine Engine oil 22. According to DIN 51511 (API CF, CF-4, CI-4; ACEA E3, E4, E5; JASO DH-1)SAE10W-40 −15 °C (−5 °F)+45 °C (+104 °F)About 3.5 l(0.9 gal)Hydraulic oil reservoirHydraulic oil HVLP 46 33. According to DIN 51524 section 3, ISO-VG 46.Year-round 44. Depending on local conditions – see “Oil types for diesel engine (depending on temperature)” on page 7-11.19.1 l (5 gal)Biodegradable oil 55. Biodegradable hydraulic oil based on saturated synthetic esters with an iodine value of < 10, according to DIN 51524, section 3, HVLP, HEES.Panolin HLP Synth 46BP BIOHYD SE-S 46GreaseRoller and friction bear-ingsKPF 2 K-20 6ISO-L-X-BCEB 2 76. KPF 2 K-20 according to DIN 51502 lithium-saponified grease.7. ISO-L-X-BCEB 2 according to DIN ISO 6743-9, lithium-saponified grease.Year-round As requiredOpen transmissionslive ring: ball bearingLive ring teethGrease nipplesBattery terminals Acid-proof grease 88. Standard acid-proof grease NGLI category 2.FINA Marson L2 Year-round As requiredFuel 99. Sulphur content below 0.05 %, cetane number over 45Diesel fuel 1010. In countries where level 3A/Tier IV exhaust emission regulations apply provisionally, use diesel fuels with a sulphur content of < 15 ppm.ASTM D975-94: 1D,2D (USA)Summer or win-ter dieseldepending onoutside tempera-tures24.2 l(6.4 gal)EN 590 (EU)ISO 8217 DMX (Inter-national)BS 2869-A1, A2 (GB)JIS K2204 (Japan)KSM-2610 (Korea)GB252 (China)Biodegradable dieselfuelEN 14214ASTM D-6751Engine cooling sys-tem CoolantSoft water and anti-freeze SF D12 Plus(ASTM D4985)Year-round 3.5 l (0.9 gal)Control lever base Adhesive fluid grease Förch S401 Year-round As requiredWasher system Cleaning agent Water and antifreeze Year-round 1.22 l(0.3 gal)