7-20 OM ET18/20/24 us 1.3 * et18_20_24w700.fm77.5 Cleaning and maintenance on or with the machineInformation regarding cleaning and maintenance on or with the machineCleaning the machine is divided into 3 separate areas:• Inside the cab.• Exterior of the machine.• Engine compartment.The wrong choice of cleaning equipment and agents can impair theoperating safety of the machine on the one hand, and on the otherundermine the health of the persons in charge of cleaning the machine.Follow the information below:Cleaning with washing solvents• Ensure adequate room ventilation.• Wear suitable protective clothing.• Do not use flammable liquids, such as gas or diesel.Cleaning with compressed air• Work carefully.• Wear safety glasses and protective clothing.• Do not aim the compressed air at the skin or at other people.• Do not use compressed air for cleaning your clothing.Cleaning with a high-pressure cleaner or steam jet• Cover electric parts.• Do not directly expose electrical components and damping material tothe jet.• Cover the vent filter on the hydraulic oil reservoir and the filler caps forfuel, hydraulic oil etc.• Protect the following components from moisture:- Electrical components such as the alternator etc.- Control devices and seals.- Air intake filters etc.Cleaning with volatile and easily flammable anticorrosion agentsand sprays:• Ensure adequate room ventilation.• Do not use unprotected lights or open flames.• Do not smoke.EnvironmentIn order to avoid damage to the environment, clean the machineonly in wash bays and places provided to this effect.
