Wacker Neuson G50 Operator's Manual

Also see for G50: Operator's manual Operator's manual

1A-221A OPERATION G50/G70/G851.25 Terminal ConnectionsALL CONNECTIONS TO THE TERMINALS MUST BE MADE BY A TRAINED ELECTRICIAN.BACKFEED FROM THE GENERATOR INTO THE UTILITY’S DISTRIBUTION SYSTEM CANCAUSE A SERIOUS INJURY OR DEATH TO UTILITY WORKERS!Improper connection of generator to a building’s electrical system can allow electrical current fromthe generator to backfeed into utility lines. This may result in electrocution of utility workers, fire orexplosion. Connections to a building’s electrical system must be made by a qualified electricianand comply with all applicable laws and electrical codes.ALWAYS OPEN MAIN CIRCUIT BREAKER AND SET ENGINE STOP SWITCH TO OFF “O”BEFORE INSPECTING OR ATTEMPTING ANY CONNECTIONS TO THE TERMINAL BLOCK!DANGER PELIGROGEFAHR DANGERTO REDUCE THE RISK OF ELECTRICAL SHOCK,READ OPERATORS MANUAL.IMPROPER CONNECTION OF GENERATOR TO ABUILDING'S ELECTRICAL SYSTEM CAN ALLOWELECTICAL CURRENT FROM THE GENERATORTO BACKFEED INTO UTILITY LINES.THIS MAY RESULT IN ELECTROCUTIONOF UTILITY WORKERS, FIRE OR EXPLOSION.CONNECTIONS TO A BUILDING'S ELECTRICALSYSTEM MUST BE MADE BY A QUALIFIEDELECTRICIAN AND COMPLY WITH ALLAPPLICABLE LAWS AND ELECTRICAL CODES.BORNES DE CONEXIONRACCORDS TERMINALSTERMINAL CONNECTIONSVERBINDUNGSKLEMMEN240120480277208120L1-L2 = 480V L1-N = 277VL2-L3 = 480V L2-N = 277VL3-L1 = 480V L3-N = 277VN-208120240120480277208120L1-L2 = 208V L1-N = 120VL2-L3 = 208V L2-N = 120VL3-L1 = 208V L3-N = 120VN-240120480277L1-L3 = 240VL1-N = 120VL2-N = ----L3-N = 120V114898T7L1T1T2L2T8 T5T1T4T7NT12T10T9T6T11L1T3L3L1T7 T1L2T8T2NT10T12T3T6T5T4T11L3T9T10NT5T11T12 T2T4T9L3T3T8T6L-N120VL-NL-L120VL-L240VDANGERDANGER