CopyingColorQube 8700/8900 Color Multifunction Printer 109User GuideID Card CopyingThis section includes: Copying an ID Card.......................................................................................................................................................109 Selecting Color or Black and White Copies...........................................................................................................110 Reducing or Enlarging the Image ............................................................................................................................110 Selecting the Paper Tray .............................................................................................................................................111 Specifying the Original Type .....................................................................................................................................111 Lightening or Darkening ID Card Copies ..............................................................................................................111 Automatically Suppressing Background Variation ............................................................................................112Copying an ID CardYou can copy both sides of an ID card or small document onto one side of paper. Each side is copied usingthe same location on the document glass. The printer stores both sides and prints them side by side onthe paper.To copy an ID card:1. Press the Services Home button, then touch ID Card Copy.2. Touch the ID Card Copy tab.3. Verify the output color, paper supply, and reduce/enlarge settings. Change the settings as needed.4. Touch the Image Quality tab.5. Verify the original type, lighten/darken, and background suppression settings for side 1. Change thesettings as needed.6. Lift the document cover.7. Place the ID card, or a document smaller than half the selected paper supply size, in the upper leftcorner of the document glass.8. Press the green Start button.9. Lift the document cover.10. Turn over the document and position it in the upper left corner of the document glass.11. Verify the original type, lighten/darken, and background suppression settings for side 2. Change thesettings as needed.12. Press the green Start button.13. Lift the document cover and remove the ID card or document.
