Safety14 ColorQube 8700/8900 Color Multifunction PrinterUser GuideOperational SafetyYour printer and supplies were designed and tested to meet strict safety requirements. These includesafety agency examination, approval, and compliance with established environmental standards.Your attention to the following safety guidelines helps to ensure the continued, safe operation ofyour printer.Ozone ReleaseThis printer produces ozone during normal operation. The amount of ozone produced is dependent onprint volume. Ozone is heavier than air and is not produced in amounts large enough to harm anyone.Install the printer in a well-ventilated room.For more information in North America, go to: ColorQube 8700 Color Multifunction Printer: www.xerox.com/environment ColorQube 8900 Color Multifunction Printer: www.xerox.com/environmentIn other markets, contact your local Xerox representative or go to: ColorQube 8700 Color Multifunction Printer: www.xerox.com/environment_europe ColorQube 8900 Color Multifunction Printer: www.xerox.com/environment_europePrinter Location Place the printer on a level, solid, non-vibrating surface with adequate strength to hold the weight ofthe printer. To find the weight for your printer configuration, see Physical Specifications onpage 232. Do not block or cover the slots or openings on the printer. These openings are provided forventilation and to prevent overheating of the printer. Place the printer in an area where there is adequate space for operation and servicing. Place the printer in a dust-free area. Do not store or operate the printer in an environment of extreme temperature or humidity. Do not place the printer near a heat source. Do not place the printer in direct sunlight. Do not place the printer where it is exposed directly to the cold air flow from an airconditioning system. Do not place the printer in locations susceptible to vibrations. For optimum performance, use the printer at the elevations specified in Elevation on page 234.
