CopyingColorQube 8700/8900 Color Multifunction Printer 99User GuideSelecting Book CopyingWhen copying a book, magazine, or other bound document, you can copy either the left or right pageonto a single sheet of paper. You can copy both the left and right pages onto two sheets of paper, or as asingle image on one sheet of paper.Note: You must use the document glass to make copies from books, magazines, or other bounddocuments. Do not place bound originals in the document feeder.To set up book copying:1. Press the Services Home button, then touch Copy.2. Touch the Layout Adjustment tab, then touch Book Copying.3. On the Book Copying screen, select one of the following: Off copies both pages of an open book as one image on a single sheet of paper. Both Pages copies the left and the right pages of an open book onto two sheets of paper. IfBinding Edge Erase is required, touch the arrows to erase up to 2 in. Left Page Only copies only the left page of an open book on a single sheet of paper. If BindingEdge Erase is required, touch the arrows to erase up to 1 in. Right Page Only to copy only the right page of an open book on a single sheet of paper. IfBinding Edge Erase is required, touch the arrows to erase up to 1 in.4. Touch Save.Shifting the ImageYou can change the placement of an image on the copy page. This is useful if the image is smaller thanthe page size. Originals must be positioned as follows for image shift to work correctly: Document Feeder: Position originals face up, long edge entering the feeder first. Document Glass: Position originals face down, in the back-left corner of the document glass, longedge to the left.To change the placement of the image:1. Press the Services Home button, then touch Copy.2. Touch the Layout Adjustment tab, then touch Image Shift.3. On the Image Shift screen, select one of the following: Auto Center centers the image on the page. Margin Shift allows you to specify the position of the image. Touch the Up or Down and Left orRight arrows to specify the amount of shift for Side 1. Touch the Up or Down and Left or Rightarrows to specify the amount of shift for Side 2, or select Mirror Side 1.Note: You can use preset values that were previously saved by the system administrator. TouchPresets in the lower left corner of the screen, and select a preset from the drop-down menu.4. Touch Save.
