Xerox DocuPrint 92C Installation Planning Manual

Also see for DocuPrint 92C: Message guide Quick reference card Quick reference card Troubleshooting guide Quick reference card

Contents

Xerox DocuPrint 92C Installation Planning Manual Manual pdf 14 page image

PRODUCT OVERVIEW1-4 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODEL 92C NPS• PC 386 or 486, running MS-DOS, version 6.2, with one of thefollowing TCP/IP packages:— PathWay Access 3.1, Wollongong Integrated Networking/Transmission Control Protocol (WIN/TCP) for DOS, release6.0— File Transfer Program (FTP) software, PC-TCP/IP, release3.0 or higher— Sun Personal Computer–Network File Services (PC-NFS),version 5.1• IBM RS/6000 running IBM AIX, version 4.1• HP/Apollo running HP-UX, version 10.01• DECStation 5000/200 running DEC Ultrix, version 4.3• Apple Macintosh, System 7.x or 8.x, using AppleTalk throughEtherTalk, phase 1 or 2• Any system that supports RFC-1179 lpr/lpd.DocuPrint Model 92C NPS software may be compatible withworkstation models and software versions other than those listedabove.Client networking softwareXerox client software, a third-party TCP/IP lpr networking software,Novell, or Apple/Macintosh Printer Access Protocol (PAP)networking software must be installed on your client workstations ordownloaded from the printer controller. This software provides aninterface with the printer controller, which allows you to submit printjobs and check job status.Note: The DocuPrint printing options available to a client user varyaccording to the networking software loaded on the clientworkstation.For additional information on submitting jobs from a clientworkstation, refer to the Xerox DocuPrint Network Printer SeriesGuide to Submitting Jobs from the Client.Ethernet LANUsers of networked client workstations may send print jobs to theDocuPrint NPS printer over the Ethernet LAN using TCP/IP,AppleTalk using EtherTalk Link Access Protocol (ELAP), or NovellNetWare 3.1x as the network protocol.Regardless of printing or transmission protocol, the Ethernetconnection to the printer controller must be compatible with theInstitute of Electrical and Electronics Engineers (IEEE) 802.3standard.