Xerox DocuPrint 92C Installation Planning Manual

Also see for DocuPrint 92C: Message guide Quick reference card Quick reference card Troubleshooting guide Quick reference card

Contents

Xerox DocuPrint 92C Installation Planning Manual Manual pdf 55 page image

CONTROLLER SPECIFICATIONS AND REQUIREMENTSXEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODEL 92C NPS 5-7Controller hardware specifications and requirements summaryThe following table summarizes the specifications and electricalrequirements of your DocuPrint NPS printer controller hardwarecomponents.For a summary of printer hardware specifications and requirements,refer to the “Printer specifications and requirements” chapter of thisguide. Contact your service representative if you have questions notspecifically addressed in this guide.Table 5-4.DocuPrint Model 92C NPS printer controllerspecifications and power requirementsDeviceDimensions (depth,width, height) WeightHeatdissipation Power requirements Cable lengthsProcessor d=17.5 in. / 44.5 cmw=17.5 in. / 44.5 cmh= 5 in. / 12.7 cm27 lbs. /12.7 kgs1,100 BTUper hoursSun Ultra 2 (60 Hz):100 to 240 VAC,15 amp, 0.4 KVA,5-15 NEMASun Ultra 2 (50 Hz):100 to 240 VAC,15 amp, 0.4 KVASun Ultra 60 (60 Hz):100 to 240 VAC,15 amp, 0.4 KVA,5-15 NEMASun Ultra 60 (50 Hz):100 to 240 VAC,15 amp, 0.4 KVAPower: 8 ft. /2.4 mInterface toprinter:20 ft. / 6.1 musable lengthMonitor d=21 in. / 53.3 cmw=19 in. / 48.3 cmh=21 in. / 53.3 cm61 lbs. /27.7 kg408 BTUper hour100-120 ~ VAC,1 phase, 50-60 Hz,3.0 amp, 0.4 KVA200-240 ~ VAC,1 phase, 50-60 Hz,2.0 amp, 0.4 KVAVideo cable toprocessor:46 in. / 1.17 m4 mm cartridgetape drived=12.25 in. / 31 cmw=7.5 in. / 19 cmh=2.75 in. / 7 cm8 lbs. /6.6 kg--- 100-120/200-240 VAC,0.8/0.4 amp, 47-63 HzSCSI cable toprocessor oradditional SCSIdevice:28 in. / 71 cmKeyboard d=7.5 in. / 19.1 cmw=20 in. / 50.8 cm2 lbs. / 1kg --- --- 72 in. / 1.8 mMouse d=3 in. / 8 cmw=4 in. / 10 cmh=2 in. / 5 cm0.3 lbs. /0.14 kg--- --- 25 in. / 63 cm