Xerox DocuPrint 92C Installation Planning Manual

Also see for DocuPrint 92C: Message guide Quick reference card Quick reference card Troubleshooting guide Quick reference card

Contents

Xerox DocuPrint 92C Installation Planning Manual Manual pdf 87 page image

XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODEL 92C NPS A-1A. ASuppliesThis appendix provides information and specifications for the mediayou use with your Xerox DocuPrint Model 92C printer. Instructions forordering supplies are also provided.Consumable supplies (those that are depleted during operation ofthe system), such as paper, dry ink, developer, fuser agent, etc.,must be ordered for your printer. It is important that an adequatesupply of these items be on hand for installation, and that your supplybe maintained afterwards.Paper and other throughput stocksThe success of any print run is greatly dependent on the properselection, care, and handling of the stock used.Selecting paperYou need to select your paper carefully. If you do not use the properpaper, you increase the probability of paper jams and misfeeds. Thestocks you use must meet the specifications set forth by Xerox foroperability in the printer. For additional information about paperspecifications, refer to Helpful Facts about Paper, delivered with yourprinter.Acceptable paper stocks and sizes Your DocuPrint Model 92C printer accepts the following standardsize cut-sheet papers:• US Letter: 8.5 by 11 inches / 216 by 279 mm• US Legal: 8.5 by 14 inches / 216 by 356 mm• A4: 8.27 by 11.69 inches / 210 by 297 mmRecommended weight and grade: Use a good quality, xerographic-grade paper. For best results, usepaper that is 20-pound or 80 gsm (grams per square meter) bond,xerographic grade. Xerox 4024 Dual Purpose Paper provides optimalperformance in the printer. Refer to the consumable supplies table,later in this appendix.Use paper within these parameters:• Lightest: 20-pound or 80 gsm bond• Heaviest: 110-pound or 200 gsm index.