Xerox DocuPrint 92C Installation Planning Manual

Also see for DocuPrint 92C: Message guide Quick reference card Quick reference card Troubleshooting guide Quick reference card

Contents

Xerox DocuPrint 92C Installation Planning Manual Manual pdf 46 page image

PREPARING FOR INSTALLATION4-10 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODEL 92C NPS• Form names—distinct form names for DocuPrint NPS that mapto the DocuPrint virtual printer names.DocuPrint NPS as a remote printer (RPRINTER)Provide the following information to the service representative if youconfigure DocuPrint NPS as a remote printer on the Novell network(for further information, refer to the “Installation process” section inthe “Installation” chapter of this guide):• Novell print server name—indicates the name of the printserver to which the DocuPrint NPS will connect. An advertisingprint server with this name must be running on the Novellinternet.• Printer name(s) to service—refers to the name(s) of the printersdefined for the Novell print server. Virtual printers should bedefined with these names after DocuPrint NPS installation iscomplete. These printers should be defined as type RemoteOther/Unknown.IPX internal network number Specify the network number for the internal IPX network in theDocuPrint server. This number must be globally unique within theNetWare internet to which the DocuPrint NPS is connected. (Do notassign a number that is used by other machines to which theDocuPrint NPS will be connected.)LAN network number Specify the network number for the cabling system to which theDocuPrint NPS is connected, for example the Ethernet or Token Ringsegment.Network framing type Specify the network framing type used for IPX/SPX communicationby DocuPrint NPS. There are eight options:• ETHERNET__II• ETHERNET__802.3• ETHERNET__802.2• ETHERNET__SNAP• TOKENRING• TOKENRING__SNAP• FDDI• FDDI__SNAP.Choose a framing type used by the file server that communicateswith DocuPrint NPS. If you are using print server or remote printer,and have the DocuPrint NPS communicate with a different machinefor each, then choose a framing type that is used by both of themachines.If you are installing a new Novell network using Ethernet, it isrecommended that you choose the ETHERNET__II framing type forthe file server and the DocuPrint NPS. If you are using Token Ringand the Novell server has both TOKENRING and TOKENRING_SNAP enabled, use TOKENRING on the DocuPrint NPS. ForFDDI networks running Novell, it is recommended that you choosethe FDDI framing type.