Xerox DocuPrint 92C Installation Planning Manual

Also see for DocuPrint 92C: Message guide Quick reference card Quick reference card Troubleshooting guide Quick reference card

Contents

Xerox DocuPrint 92C Installation Planning Manual Manual pdf 83 page image

XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODEL 92C NPS 8-18. 8InstallationThis chapter describes the activities performed by you and Xeroxduring the installation of the Xerox DocuPrint Model 92C NPShardware and software components. Before installation can begin,you must complete the tasks described in the “Preparing forinstallation” chapter of this guide.Installation processXerox is responsible for the physical installation of the DocuPrintModel 92C NPS hardware components and the software.For customers outside the United States, contact your local Xeroxrepresentative or operating company for your specific installationprocess.The installation process can take one or several days to complete.Equipment, software kits, and documentation kits may all arrive inone day, or over the course of several days. When all of thenecessary items are in place, Xerox personnel will complete theinstallation of the NPS components.In the United States, the steps in the installation process typicallyoccur in the following order:1. Xerox personnel installs all DocuPrint Model 92C NPS printerhardware and connects the printer controller to your networkthrough the Ethernet, Token Ring, and FDDI connector yousupply. This process takes approximately four hours if all thenecessary network and electrical connectors are in place.2. Xerox personnel loads printer controller software on the PrinterController (approximately 1.5 hours).3. Xerox personnel downloads Xerox client software if applicable,on one client workstation to validate the installation (15minutes). Software is downloaded on another client workstationas part of training conducted by your systems analyst. All otherclient software installations are your responsibility. Refer to theXerox DocuPrint Network Printer Series Guide to Configuringand Managing the System for more information.If your site uses third-party Transmission Control Protocol/Internet Protocol (TCP/IP) lpr networking software, refer to theXerox DocuPrint Network Printer Series Guide to Configuringand Managing the System for information on modifying theprintcap file.4. Xerox personnel test the system and run sample jobs (30minutes).