PRINTER COMPONENTS AND OPTIONSXEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODEL 92C NPS 3-9Figure 3-8. Third-party finishing device configuration1 Paper path2 Bypass transport3 Third-party finishing devicesIt is important to note that while the bypass transport option providesyou with an interface between your DocuPrint 92C NPS and yourfinishing accessories, the finishing accessories require their own ACand DC power sources. The power must be independent of yourDocuPrint 92C NPS.More information on the bypass transport and document finishingcan be obtained from the Xerox Finishing web sitehttp://www.xerox-finishing.com/Included on this web site are the DFA Interface Specifications foryour printer.Consult your Xerox sales representative, as well as the salesrepresentative of the company from which you purchased yourfinishing equipment, for specific electrical and space requirements.Interface with third-party devicesThe mechanical interface between the laser printer and third-partyfinishing devices can connect as follows:• Physically aligning a finishing device with the exit slot of thebypass transport exit slot.• Docking the third-party finishing device to the bypass transportand establishing a mechanical and electrical interface betweenthe two.Electrical interfaceWhen you power up the NPS, the printer automatically detects thepresence of the bypass transport and external finishing devices. Thesystem also begins monitoring the interlocks (physical links) betweenthe bypass transport and the finishing device and starts finishingdevice interface communications.321
