C E N T R E W A R E D P S O F T W A R E I N S T R U C T I O N S 9Setup Wizard for NDS Networks1. Click your mouse once on the Setup Wizard button, or open thePrinter menu and select Setup Wizard.2. When the Setup Wizard Welcome screen appears, click Next >.3. The Select NetWare Server dialog box appears.4. Click once on the Install this device on an NDS Tree.5. Select the desired NDS Tree.6. If prompted, enter a user name and password for the desired Tree andclick Login.7. Once you have selected your NDS Tree, click Next>.8. The Select Context dialog screen will appear and the default contextfor the selected Tree will be displayed. To configure your printer forthis context, click Next >. To select a different context, click ChangeContext, select a new context from the list, click OK. Click Next >.9. The Name the Device dialog box will appear. Enter a new name forthe printer you have selected, or keep the default name. Click Next >.10. The Select Queue dialog box appears.To create a new queue, click the Create Queue button and enter a newqueue name. Click Create Queue again. Click Next>.To select an existing queue, click the Select Queue button and chose aqueue. Click OK. Click Next >.11. The Confirm Choices dialog box will appear displaying the PrinterName and the Name of the Queue you have supplied. Click Finish.12. A pop-up box will appear indicating the Wizard is configuring devices.13. After a few moments, the Congratulations dialog screen will appear.Click the Close button. A box will pop up asking you if you would likea test page sent to the queue. Click Yes.14. Review this page and VERIFY that your Tree, Context, and Queuename agree with those you chose in Setup Wizard.15. Run a test print from a software application to verify printer operation.
