C O N N E C T I N G T O Y O U R N E T W O R K 5Quick Steps For Connection & SetupQuick Steps for printer connection and setup, for use by the experiencedSystems Administrator, are provided within this section.Quick Steps common to virtually all platforms include:1. Install a Network Interface Card within the printer. See details in thesection of this chapter entitled Installation of the Network InterfaceCard (NIC).2. Install cabling to link the Network Interface Card to your network. Seedetails in the section of this chapter entitled Network CableConnection.3. Print a Print Settings page from the Control Panel on the DocuPrintprinter to determine the printer’s total memory, current Network Cardsettings, and all current printer settings. See details in the section ofthis chapter entitled Print the Printer Settings Page.4. If you are connecting this printer using TCP/IP protocol, refer to thesection in this chapter entitled Set an IP Address.5. Go to the appropriate chapter(s) within this Technical InformationGuide (TIG) covering your workstation Operating System (forexample, Windows; Macintosh; UNIX; OS2) and follow the setupinstructions provided.6. If your job doesn’t print correctly, refer to the Troubleshootingsection within the applicable Operating System chapter of this TIGfor problem-solving information.
