C E N T R E W A R E D P S O F T W A R E I N S T R U C T I O N S 43Selecting Drivers To Be Installed Or UpgradedNOTE: Before using the CDI Admin Utility, the location (path) of theprinter drivers should be noted. This information will need to be suppliedto the utility, and the Browse function will facilitate entering the correct fileserver path. It will also be necessary to determine where the ConfigurationFile should be located.1. Select the desired printer driver. Highlight the printer to be managed.This driver will have an Action applied by the CDI utility for all theclient workstations.2. Select Install or Upgrade as the action to be performed.3. Select the Operating System version of the driver you want installed orupgraded.4. Enter the path for this driver. The Browse button will allow easynavigation of the file server to locate the driver directory for theselected driver.5. Select the Port/Queue connection. Use the pull-down menu to find thedesired port connection. Queue assignments must include a fullyqualified network path name.6. Use the Add To Configuration list button to add this driver to the list.7. Repeat the above steps for each desired driver to be installed orupgraded by the Xerox CDI utility.8. When you have finished the selection process, click Apply.NOTE: If an error message appears regarding the path or version of thedriver, correct the path and or version and click Apply.
