Printing Basics 184Using the Printer Setting Utility to Change the Printer SettingsYou can select menu items and corresponding values from the Printer Setting Utility.The following procedure uses Windows XP as an example.NOTE:• Factory defaults may vary for different regions.These settings are active until new ones are selected or the factory defaults are restored.To select a new value as a setting:1 Click start → All Programs → Fuji Xerox → Fuji Xerox Printer Software for Asia-Pacific →your printer → Printer Setting Utility.NOTE:• The window to select a printer appears in this step, when multiple print drivers are installed on yourcomputer. In this case, click the name of the desired printer listed in Printer Name.The Printer Setting Utility appears.2 Click the Printer Maintenance tab.3 Select the desired menu item.Each menu item has a list of values for the menu item. A value can be:• A phrase or word to describe a setting• A numerical value that can be changed• An On or Off setting4 Select the desired value, and then click the Apply New Settings or Restart printer to applynew settings button.Driver settings may have precedence over changes previously made and may require you tochange the Printer Setting Utility defaults.Adjusting the LanguageTo display a different language on the operator panel:• The Operator Panel1 Press the (System) button.2 Select Panel Language, and then press the button.3 Select the desired language, and then press the button.
